To get any use out of the 350 you will need to disconnect all of your peripheals but even that will not be enough if you have any type of graphic accelerators installed and more then one hard drive. For most of todays PCs 450 is about the minimum requirement and 550 is often better.
Is that a Pentium 4 processor or one of the new Intel processors? Can you be more specific and provide the exact processor and VGA cards you have? Looking at what you have posted, I dont see it consuming more than 200W of power. You should be in good shape with 350W
Looking at the factory specs for your motherboard you have a minimum powere requirement of 275 Watts but that is for a very bare Board with small RAM, no PCI connections and a small HDD. Looking at what you have installed I believe the minimum to run it is 350 watts, The board can handle up to 500 watts. I believe 400-450 would be the ideal for you. You may read the full specs here:
You may b able to use the 350 power supply. But check the section on Power management, you will most likely need to change some settings to get full use from the 350
Hey there! Looks like you're enjoying the discussion, but you're not signed up for an account.
When you create an account, we remember exactly what you've read, so you always come right back where you left off. You also get notifications, here and via email, whenever new posts are made. And you can like posts and share your thoughts.
Sign Up
Bookmarks